FAULSense™
The FAULSense™ product line is a hybrid “PZT/FBG” dynamic acousto-ultrasound system that uses a distributed array of piezoelectric “PZT” actuators used as acoustic-ultrasound exciters used to sonicate large structures. These actuators are integrated within a flex-sensor circuit architecture with a distributed array of FBG-sensors receivers that detect and monitor the generated acoustic ultrasound signals which contain structural information of the structure under test. The FAESense™ systems are fully integrated, compact, lightweight, and power efficient available as single-fiber or multi-fiber (2- to 32-fiber channels) data logger transceivers with USB, ethernet, or Wi-Fi data communications modality, to a remote PC software or with on-board data processing and storage.

Specifications | |
---|---|
Monitoring Mode | Distributed Hybrid PZT/FBG acoustic-ultrasound actuator/receivers |
PZT Driver | DC to 5-MHz Digital Waveform Synthesizer with low noise 1000-V power amplifier |
FBG Actuators | Piezoceramic Type PIC255* Flex circuit (-250 to 1000V); 0.64 (μm/m/V) |
FBG Sensing Elements | 100’s FBG sensor AU sensor elements on a single fiber cable |
Sensor Multiplexing | WDM/TDM with 1 x 12 MEMS optical switch |
Multiplex Sensing Channels | 12 independent electric/fiber sensor cable channels |
FBG Sensor Demodulator | Resonant Cavity Adaptive Two-Wave Mixing (TWM) Interferometry |
Strain Accuracy | ≤ 10-fento-strains |
Dynamic Range | 5,000-μstrains |
Frequency Sensitivity | 0.1-microstrain/Hz |
Sampling Rate | DC to 5-MHz |
Signal Processor | Intel Compute Stick with Core M7 (3.2-GHz) Processor; 256GB Flash Memory |
Data Communication | Wireless – WiFi 802.15.4, Bluetooth, USB |
Power Consumption | ≤ 4-W @ 28-VDC |
Operating Temperature | -60°F to 160°F |
Weight & Size | ~ 250-grams |
Package Dimensions | 2-inch x 2-inch x 4-inch |